bootjack

An area to upload images of pieces cut using VCarve Pro
Post Reply
User avatar
sawmiller
Vectric Wizard
Posts: 486
Joined: Sat May 03, 2008 8:34 pm
Model of CNC Machine: joe's rack and pinion hybrid
Location: camden,tn

bootjack

Post by sawmiller »

i needed a bootjack, so i made this file.
instructions are included.
bootjack.crv
(725.5 KiB) Downloaded 155 times
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn

Bob Reda
Vectric Wizard
Posts: 733
Joined: Wed Aug 16, 2006 7:34 pm
Model of CNC Machine: shopbot 48x48 upgraded prt
Location: Monessen, Pa
Contact:

Re: bootjack

Post by Bob Reda »

Thank you, these things come in handy!

Bob

User avatar
ezurick
Vectric Wizard
Posts: 407
Joined: Sat Oct 20, 2018 1:27 pm
Model of CNC Machine: Chinese 6040

Re: bootjack

Post by ezurick »

sawmiller wrote:i needed a bootjack, so i made this file.
instructions are included.
bootjack.crv

Sorry to be naive, but what is a bootjack?
~ Ed

Savannahdan
Vectric Wizard
Posts: 383
Joined: Sun May 03, 2015 12:25 pm
Model of CNC Machine: Axiom AR8
Location: Savannah, GA

Re: bootjack

Post by Savannahdan »

Excellent timing. I've needed to make one of these to get my work boots off. Thank you for the plan.

User avatar
SteveNelson46
Vectric Wizard
Posts: 667
Joined: Wed Jan 04, 2012 2:43 pm
Model of CNC Machine: Camaster Stinger using WinCNC
Location: Tucson, Az.

Re: bootjack

Post by SteveNelson46 »

ezurick wrote:
sawmiller wrote:i needed a bootjack, so i made this file.
instructions are included.
bootjack.crv

Sorry to be naive, but what is a bootjack?
Steve

User avatar
highpockets
Vectric Wizard
Posts: 2871
Joined: Tue Jan 06, 2015 4:04 pm
Model of CNC Machine: PDJ Pilot Pro

Re: bootjack

Post by highpockets »

Thanks for sharing....
John
Maker of Chips

User avatar
sawmiller
Vectric Wizard
Posts: 486
Joined: Sat May 03, 2008 8:34 pm
Model of CNC Machine: joe's rack and pinion hybrid
Location: camden,tn

Re: bootjack

Post by sawmiller »

You step on a bootjack with one foot and catch the back of your other boot in its crotch, allows handless removal of boots, usually dirty..
The nice thing is if you just do the profile cut, it takes 2 min and 40 seconds to cut it out with a smooth finish to the cut using last pass.
Im not that fast on the bandsaw, and then having to remove marks.
Good for scraps as gifts
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn

User avatar
ezurick
Vectric Wizard
Posts: 407
Joined: Sat Oct 20, 2018 1:27 pm
Model of CNC Machine: Chinese 6040

Re: bootjack

Post by ezurick »

Thanks for explaining and showing me what a bootstrap is. I guess I knew, but wasn't sure. I don't wear boots like that, so I guess that is also why I was unsure.
~ Ed

User avatar
WNC_Ed
Vectric Craftsman
Posts: 264
Joined: Fri Dec 07, 2018 5:56 pm
Model of CNC Machine: Shark HD4 AXYZ 4010
Location: Western North Carolina - Heart of the Smokies

Re: bootjack

Post by WNC_Ed »

Downloaded - thank you.
on my list of "tings to do".
Thank you again.
Maker of sawdust

User avatar
sawmiller
Vectric Wizard
Posts: 486
Joined: Sat May 03, 2008 8:34 pm
Model of CNC Machine: joe's rack and pinion hybrid
Location: camden,tn

Re: bootjack

Post by sawmiller »

20190826_125254.jpg
From scraps
woodmizer sawmill and joe's hybrid cnc, a good combination
In the heart of Tn

sharkcutup
Vectric Wizard
Posts: 515
Joined: Sat Mar 26, 2016 3:48 pm
Model of CNC Machine: Shark HD3 Pro Extended Bed with Spindle
Contact:

Re: bootjack

Post by sharkcutup »

Downloaded and Changed the Font to a HAYMAKER font style (downloaded previously not part of the V-Carve font library) which is a more western style look for when I get around to making mine.

Great Idea and Thank you for Sharing!

Sharkcutup
Facebook: Hogan's CNC Crafts
Website: www.hoganscnccrafts.com
V-Carve Pro 9.519

Post Reply