I had some trouble installing EasyDaveTailMaker Verion 5.5. When I download it, winzip made it into a zip file.
So what I did was download it on another computer, change the name and then saved it on a zip drive.
I installed it and it looked good. However, when I run it, I get:
attempt to call a nil value
and then an ok button
Do I need to enter my dovetail information first, or should I try reinstalling the gadget?
Thanks in advance for any help. I am using Aspire 11.010
EasyDovetailMaker V 5.5 error
- jimandi5000
- Vectric Wizard
- Posts: 1055
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: EasyDovetailMaker V 5.5 error
Let me look at it and see what is up with Ver5.5 code.hmatyas wrote: ↑Mon Jan 31, 2022 2:40 amI had some trouble installing EasyDaveTailMaker Verion 5.5. When I download it, winzip made it into a zip file.
So what I did was download it on another computer, change the name and then saved it on a zip drive.
I installed it and it looked good. However, when I run it, I get:
attempt to call a nil value
and then an ok button
Do I need to enter my dovetail information first, or should I try reinstalling the gadget?
Thanks in advance for any help. I am using Aspire 11.010
I work on it Monday.
Last edited by jimandi5000 on Mon Jan 31, 2022 3:58 am, edited 1 time in total.
Thanks,
Jim
Jim
-
- Vectric Apprentice
- Posts: 96
- Joined: Sun Sep 06, 2015 2:49 am
- Model of CNC Machine: Shark HD3
Re: EasyDovetailMaker V 5.5 error
Jim
Thank you, however where do I find version 5.3? You gave me a link for Version 5.5. I tried to
find it on the Vectric site but I could not find it.
Is there a way to unistall and reinstall it?
Thanks again
Harvey
Thank you, however where do I find version 5.3? You gave me a link for Version 5.5. I tried to
find it on the Vectric site but I could not find it.
Is there a way to unistall and reinstall it?
Thanks again
Harvey
-
- Vectric Apprentice
- Posts: 96
- Joined: Sun Sep 06, 2015 2:49 am
- Model of CNC Machine: Shark HD3
Re: EasyDovetailMaker V 5.5 error
Jim
This morning I downloaded version 5.2.
I do not get any errors like I did in Version 5.5
It appears to be working, as it created tool paths.
Thank you.
Harvey
This morning I downloaded version 5.2.
I do not get any errors like I did in Version 5.5
It appears to be working, as it created tool paths.
Thank you.
Harvey
- jimandi5000
- Vectric Wizard
- Posts: 1055
- Joined: Wed Mar 11, 2015 6:50 pm
- Model of CNC Machine: Home Made 60 x 120
- Location: North Houston Tx.
- Contact:
Re: EasyDovetailMaker V 5.5 error
I'm having the same issue with rev. 5.5 on VCarvePro. Where can I find a working version (5.2?)? Thx.
- adze_cnc
- Vectric Wizard
- Posts: 4373
- Joined: Sat Jul 27, 2013 10:08 pm
- Model of CNC Machine: AXYZ 4008
- Location: Vancouver, BC, Canada
Re: EasyDovetailMaker V 5.5 error
The downloads are in the "Gadgets < User Submissions" forum: EasyDovetail 5.x