Box Gadget What I learned from it.

This section is for general discussion about Gadgets
Post Reply
Mark Jones
Vectric Craftsman
Posts: 131
Joined: Fri Aug 28, 2020 8:38 pm
Model of CNC Machine: Shark HD 5
Location: Ozark
Contact:

Box Gadget What I learned from it.

Post by Mark Jones »

I have enjoyed using the Vcarve Pro and the Box Creator Gadget. This video shows what I learned from it this past week. Some of these tips may benefit you and if you have a tip that will help me please say so. After cutting up three sheets of 1/4" 4x8 plywood I learned a few things from it. Using the Tile Toolpath to handle the output of the gadget is key to making boxes that fit every time.



Mark Jones
Mark Jones

bravesoul1950
Posts: 38
Joined: Thu Apr 30, 2015 8:23 pm
Model of CNC Machine: Shopbot

Re: Box Gadget What I learned from it.

Post by bravesoul1950 »

Thank you Mark, very informative.

Joe

Todd D
Vectric Craftsman
Posts: 102
Joined: Fri Feb 07, 2020 4:07 am
Model of CNC Machine: Axiom AR8 PRO V5

Re: Box Gadget What I learned from it.

Post by Todd D »

thanks for that I'm going to try this out, have some drawers to make coming up

User avatar
scotttarnor
Vectric Wizard
Posts: 938
Joined: Fri Aug 30, 2019 11:40 pm
Model of CNC Machine: Piranha XL , Shark HD520
Location: La Crosse WI

Re: Box Gadget What I learned from it.

Post by scotttarnor »

Thank you !
Scott T

@scottscnc

User avatar
scotttarnor
Vectric Wizard
Posts: 938
Joined: Fri Aug 30, 2019 11:40 pm
Model of CNC Machine: Piranha XL , Shark HD520
Location: La Crosse WI

Re: Box Gadget What I learned from it.

Post by scotttarnor »

I liked your advice on the USB port also so I picked up one of these on Amazon.
Attachments
image.jpg
Scott T

@scottscnc

Mark Jones
Vectric Craftsman
Posts: 131
Joined: Fri Aug 28, 2020 8:38 pm
Model of CNC Machine: Shark HD 5
Location: Ozark
Contact:

Re: Box Gadget What I learned from it.

Post by Mark Jones »

That works with out a cable hanging out there. Just as long as it is not stressing out the shark port it will be great.

I made one of the Vectric 3d hearts tonight. Went back and forth between the shop and the computer via usb several times. They had the milling bit times WAY slow so after a couple of scratching my head wondering I pushed stop and went back in and edited all the tool paths. I am really enjoying this software.
Mark Jones

User avatar
Adrian
Vectric Archimage
Posts: 14504
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: Box Gadget What I learned from it.

Post by Adrian »

On any file that was created by someone else you MUST always verify that all the settings are suitable for your machine, tools and material. The Vectric files all come up with a warning saying just that when you load them. The default speeds are very slow in case people don't heed those messages and potentially ruin an expensive piece of material or damage their machines at worst.

Mark Jones
Vectric Craftsman
Posts: 131
Joined: Fri Aug 28, 2020 8:38 pm
Model of CNC Machine: Shark HD 5
Location: Ozark
Contact:

Re: Box Gadget What I learned from it.

Post by Mark Jones »

I agree. It's good to error on the slow side for sure. After editing the tooling paths it took about 45 minutes to carve. The Vectric mahogany heart box came out great. Wife's Birthday is in 2 days. She will enjoy this with some money inside. Going to burn in a laser text engrave on it as well.

You all at Vectric are doing a great job with this software. I enjoy using it and it makes sense.

This is the first carve on a double sided 3d project and the first time I used the ball nose bit. It did a nice job. You guys and gals make this look easy! Thanks!

Mark Jones
Mark Jones

Mark Jones
Vectric Craftsman
Posts: 131
Joined: Fri Aug 28, 2020 8:38 pm
Model of CNC Machine: Shark HD 5
Location: Ozark
Contact:

Re: Box Gadget What I learned from it.

Post by Mark Jones »

I put in a .01 instead of a .006 allowance in the box joint gadget when working with quarter inch plywood making box joints. It made the box snap together very easily didn't even need clamping but i of course did. Thought I would share this as my .006 was still too tight when assembling them.

I have been out today making customized stuff all morning. I love this software. It make it fun. Made some bandsaw throat places in about 2 minutes out of plexiglass. Vcarve makes it so easy!

Thanks!

Mark Jones
Mark Jones

Custom carving
Vectric Craftsman
Posts: 217
Joined: Sat Oct 10, 2020 2:26 am
Model of CNC Machine: next wave shark 520

Re: Box Gadget What I learned from it.

Post by Custom carving »

want to read more in this thread when I have more time thanks for posting

Custom carving
Vectric Craftsman
Posts: 217
Joined: Sat Oct 10, 2020 2:26 am
Model of CNC Machine: next wave shark 520

Re: Box Gadget What I learned from it.

Post by Custom carving »

I love the creative ways that people come up with to make things easier. It only took me 5 days to watch the video... LOL I really need to slow down but I don't see that happening any time soon except when I have my shoulder surgery on January 5th then I will be forced to slow down
I try to learn something every day

Mark Jones
Vectric Craftsman
Posts: 131
Joined: Fri Aug 28, 2020 8:38 pm
Model of CNC Machine: Shark HD 5
Location: Ozark
Contact:

Re: Box Gadget What I learned from it.

Post by Mark Jones »

scotttarnor wrote:
Fri Oct 16, 2020 12:57 pm
I liked your advice on the USB port also so I picked up one of these on Amazon.
The flexible cable will help keep from wollering out the original usb slot more so than this ridged usb extender.
Mark Jones

Post Reply