halftoner for version 10

This section is for general discussion about Gadgets
Post Reply
sidofengland
Posts: 3
Joined: Tue Jul 01, 2008 8:33 pm
Location: Middlesbrough

halftoner for version 10

Post by sidofengland »

help please
cant seem to get a version of halftoner for version 10.
loaded the spiral gadget straight into the software with no problems.
struggling to get half toner to go to the version 10

User avatar
Adrian
Vectric Archimage
Posts: 14544
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: halftoner for version 10

Post by Adrian »

It's installing and working ok for me. What's happening for you?

http://gadgets.vectric.com/V10/halftoner.html

sidofengland
Posts: 3
Joined: Tue Jul 01, 2008 8:33 pm
Location: Middlesbrough

Re: halftoner for version 10

Post by sidofengland »

it tells me its an unsupported file type

User avatar
Adrian
Vectric Archimage
Posts: 14544
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: halftoner for version 10

Post by Adrian »

When you try to install it?

If you're using a Microsoft browser (non-chromium Edge or Internet Explorer) then try a different browser as those seem to have issues with downloading vgadget files.

sidofengland
Posts: 3
Joined: Tue Jul 01, 2008 8:33 pm
Location: Middlesbrough

Re: halftoner for version 10

Post by sidofengland »

thank you - I had no trouble with the spiral gadget using chrome.
I'll try something new.

regards
Sid

User avatar
Adrian
Vectric Archimage
Posts: 14544
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: halftoner for version 10

Post by Adrian »

You should be fine with Chrome. It's just the Microsoft browsers that have the issue.

Try downloading it again. There have been people who have had similar issues and it was fine when they downloaded a second time.

Post Reply