Half Toner with V8.505

This section is for general discussion about Gadgets
Post Reply
User avatar
Rcnewcomb
Vectric Wizard
Posts: 4334
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Half Toner with V8.505

Post by Rcnewcomb »

Using the Half Toner gadget with Aspire V8.505 I'm getting the following error. Anyone else used the Half Toner gadget with V8.505?

Failed to save tool database to file
C:\ProgramData\Vectric\Aspire\V8.5\ToolDatabase\tools.tool_db


HalfToner.JPG
- Randall Newcomb
10 fingers in, 10 fingers out
another good day in the shop

Timvmax
Vectric Wizard
Posts: 370
Joined: Tue Sep 08, 2009 3:41 pm
Location: UK

Re: Half Toner with V8.505

Post by Timvmax »

Just tried mine and it appears to be ok

User avatar
JamesB
Vectric Alumni
Posts: 1257
Joined: Tue May 30, 2006 1:24 pm
Model of CNC Machine: Exel CNC SL60/90 Pro
Location: Warwickshire, UK

Re: Half Toner with V8.505

Post by JamesB »

Randall - try checking your read-write priveliges to that folder and see if its set to read-only.
Thanks,
James

User avatar
Rcnewcomb
Vectric Wizard
Posts: 4334
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: Half Toner with V8.505

Post by Rcnewcomb »

The folder permissions were fine but the tools.tool_db file was set to readonly. I changed that and now the issue is resolved. Thanks for putting me on the right track.
- Randall Newcomb
10 fingers in, 10 fingers out
another good day in the shop

Post Reply