Show Your Gadget Created Projects

[sharkcutup]

I am interested in seeing what you have created using the Gadgets (Either Vectric's Gadgets or The Easy Gadgets by Jim Andi Gadgets).
Post your Project Creations which have utilized any of the above mentioned Gadgets here on this Thread. In posting your creations here others may become inspired to attempt a project using one of these Gadgets.

Here is a Project I had done about a month ago using The Easy Bottle Carrier Gadget (you may have seen it in the V-Carve Gallery of this Forum).

Thank You and Keep Those Chips a Flying!

Sharkcutup

[sharkcutup]

Well I guess there is nobody that uses gadgets other than me!

Sharkcutup

[Jimcad]

I have only used the Vectric Box Creator so far. I've used it many times and been very happy with the results. Can't post pictures at the moment.

Jim

[sharkcutup]

Thank You for posting!!!

I have used several of the handy gadgets. One that comes to mind I have used several times is the Alternate End points when using the Fluting Toolpath this way the machine toolpath is optimized it no longer has to return to the same side to start a path with the alternating endpoints. The toolpath is now seamless.

I also used to use the Circle Resizing Gadget a lot too but with the Recent Updates to V-Carve Pro it can now be accomplished within V-Carve.

The above are just a couple of the uses gadgets can help with in the designing capabilities or the overall outcome of a project.

Happy to hear a gadget is making designing and carving less complicated!

Sharkcutup