Custom Gadgets

This section is for general discussion about Gadgets
Post Reply
User avatar
BenjaminwithCNC
Vectric Apprentice
Posts: 13
Joined: Thu Feb 25, 2021 8:22 am
Model of CNC Machine: Danibrum 1325 ATC Rotary 4x1

Custom Gadgets

Post by BenjaminwithCNC »

Good morning everyone,

I'm searching for some time for a Gadget that helps me create Cabinet Doors.

Something like this: Creating a rectangular vector with an arch (a front model example) and being able to use this to be 20 mm offset of different door sizes, like 600x300 x2 and so on, so this arch vector will be inside the panel vector.

So a gadget, that creates the different panel size vectors and also adds a selected vector as an inner part.

If there is anyone interested in creating such a Gadget, not only that it would help others and open Vectric for Door cabinet makers, but we can also discuss some remuneration.

User avatar
adze_cnc
Vectric Apprentice
Posts: 1639
Joined: Sat Jul 27, 2013 10:08 pm
Model of CNC Machine: AXYZ 4008
Location: Vancouver, BC, Canada

Re: Custom Gadgets

Post by adze_cnc »

You might find this thread interesting: viewtopic.php?f=51&t=33007

User avatar
BenjaminwithCNC
Vectric Apprentice
Posts: 13
Joined: Thu Feb 25, 2021 8:22 am
Model of CNC Machine: Danibrum 1325 ATC Rotary 4x1

Re: Custom Gadgets

Post by BenjaminwithCNC »

Thank you, exactly this is what i thought about, only for Doors

User avatar
BenjaminwithCNC
Vectric Apprentice
Posts: 13
Joined: Thu Feb 25, 2021 8:22 am
Model of CNC Machine: Danibrum 1325 ATC Rotary 4x1

Re: Custom Gadgets

Post by BenjaminwithCNC »

I think Jim worked it out and created one, so if anyone is still searching, here is a Door Front Gadget created by Jim.

viewtopic.php?f=51&t=37869&p=276277#p276277

Thank you so much

Post Reply