Bookpile Box Michael Tyler

Post Reply
tagguy
Posts: 35
Joined: Fri Aug 11, 2017 5:37 pm
Model of CNC Machine: ShopBot Desktop

Bookpile Box Michael Tyler

Post by tagguy »

To Michael Tyler

Michael,
IMG_4257.jpeg
IMG_4258.jpeg
I have been telling my wife for months that I was going to make the "Bookpile Box". Well I got around to making it. It was a challenge in some respects, but what I took away from the project is that you are a "genius" to come up with the ideas for those tool paths. Thank you. Mine turned out pretty well. I have made many of your other projects, thanks for those too.

Michael Caul
tagguy100@yahoo.com
Attachments
IMG_4259.jpeg

User avatar
mtylerfl
Vectric Archimage
Posts: 5864
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: Bookpile Box Michael Tyler

Post by mtylerfl »

Hi Michael,

Thank you for posting the photos of your completed Bookpile Project! You did a phenomenal job!

I’m very glad you are having fun with the projects. You inspire me, and I’m sure many others, with your fine example!

Thanks for the “genius” compliment…oh, if it were only true! 😊
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

User avatar
SteveNelson46
Vectric Wizard
Posts: 2275
Joined: Wed Jan 04, 2012 2:43 pm
Model of CNC Machine: Camaster Stinger 1
Location: Tucson, Az.

Re: Bookpile Box Michael Tyler

Post by SteveNelson46 »

mtylerfl wrote:
Wed Feb 01, 2023 1:41 am
Hi Michael,

Thank you for posting the photos of your completed Bookpile Project! You did a phenomenal job!

I’m very glad you are having fun with the projects. You inspire me, and I’m sure many others, with your fine example!

Thanks for the “genius” compliment…oh, if it were only true! 😊
Michael,
In my mind you are not only a genius but a major source of inspiration to me and to many others. If not for you, I would not have progressed as far I have. Thanks for always being there.
Steve

User avatar
mtylerfl
Vectric Archimage
Posts: 5864
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: Bookpile Box Michael Tyler

Post by mtylerfl »

Thank you, Steve! It’s an incredible journey we’re on. Your encouragement is priceless!
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

User avatar
meflick
Vectric Craftsman
Posts: 106
Joined: Tue Dec 05, 2017 3:41 pm
Model of CNC Machine: Shark HD4
Location: East TN - USA

Re: Bookpile Box Michael Tyler

Post by meflick »

Tagguy, Michael, excellent work on your Bookpile. I finally got one made last Fall. I know your wife loved yours. I agree, Michael Tyler is a genius in my eyes and I always look forward to seeing what his latest creation is, even if it takes me months or years to finally get around to trying one after it is provided. II learn a lot from everyone here on the forums and appreciate all the sharing and insight provided.

User avatar
mtylerfl
Vectric Archimage
Posts: 5864
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: Bookpile Box Michael Tyler

Post by mtylerfl »

Thank you so much, Melanie! We certainly do learn a lot from each other here on the Vectric Forum!
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

Retired 1st Sgt
Posts: 78
Joined: Tue Jun 24, 2014 3:58 pm
Model of CNC Machine: Laguna IQ

Bookpile Box Michael Tyler

Post by Retired 1st Sgt »

Hopefully someone can help me out. I seen the video of the bookpile and would love to make one. They say there are no dumb questions, but I'm about to prove that theory wrong! I've included a screen shot. On the tool path it shows 2 differant tools. I realize one is for clearing larger areas, but when I run this tool path which bit do I use. the tapered ball nose or the down cut bit?
Attachments
Capture.PNG

User avatar
adze_cnc
Vectric Wizard
Posts: 4303
Joined: Sat Jul 27, 2013 10:08 pm
Model of CNC Machine: AXYZ 4008
Location: Vancouver, BC, Canada

Re: Bookpile Box Michael Tyler

Post by adze_cnc »

When you click on create toolpath the program will create 2 toolpaths for this moulding: one labelled [clear] and one not but with the same base name. The [clear] is the one you'd use for the end mil. The "not clear" one is the one you'd use for the tbn.

It looks like Michael later renamed the "not clear" one to have the bit title in the name. The two checked items in the image below are the two toolpaths created from this one moulding path.
  
toolpaths.png

Retired 1st Sgt
Posts: 78
Joined: Tue Jun 24, 2014 3:58 pm
Model of CNC Machine: Laguna IQ

Re: Bookpile Box Michael Tyler

Post by Retired 1st Sgt »

Thank you! Attention to detail right ? Lol

Post Reply