Fish Dish

Post Reply
helensdad
Vectric Apprentice
Posts: 77
Joined: Thu Jun 06, 2019 4:54 pm
Model of CNC Machine: Oozenest Ox 500 x 750/Openbuilds Minimil

Fish Dish

Post by helensdad »

Loving these monthly projects, great way of learning. This time it's Mr Tyler's Fish Dish in Poplar....
20200928_231134.jpg
Top
User avatar
Rcnewcomb
Vectric Archimage
Posts: 5358
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:
Contact Rcnewcomb

Re: Fish Dish

Post by Rcnewcomb »

Fun stuff!
- Randall Newcomb
10 fingers in, 10 fingers out
another good day in the shop
Top
User avatar
mtylerfl
Vectric Archimage
Posts: 5750
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA
Contact:
Contact mtylerfl

Re: Fish Dish

Post by mtylerfl »

Nice job, Nick!
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
Top
John1261
Posts: 2
Joined: Thu Nov 25, 2021 4:43 pm
Model of CNC Machine: onefinity woodworker 32x16

Re: Fish Dish

Post by John1261 »

my cnc x rail is 32" Y rail is 16". Can the dia of the fish plate be changed to the x rail width
Top
User avatar
SteveNelson46
Vectric Wizard
Posts: 1967
Joined: Wed Jan 04, 2012 2:43 pm
Model of CNC Machine: Camaster Stinger 1
Location: Tucson, Az.

Re: Fish Dish

Post by SteveNelson46 »

In the material setup screen swap the X measurement (11") with the Y measurement (30") so the width (X) is 30" and the height (Y) is 11". Usiing the mouse, drag select everything. Then use the rotate tool to rotate everything all at once 90 degrees. Recalculate all toolpaths.
Steve
Top
John1261
Posts: 2
Joined: Thu Nov 25, 2021 4:43 pm
Model of CNC Machine: onefinity woodworker 32x16

Re: Fish Dish

Post by John1261 »

thanks Steve
Top
Post Reply

Return to “Projects of the Month”