Fish Dish

Post Reply
helensdad
Vectric Apprentice
Posts: 77
Joined: Thu Jun 06, 2019 4:54 pm
Model of CNC Machine: Oozenest Ox 500 x 750/Openbuilds Minimil

Fish Dish

Post by helensdad »

Loving these monthly projects, great way of learning. This time it's Mr Tyler's Fish Dish in Poplar....
20200928_231134.jpg

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5864
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: Fish Dish

Post by Rcnewcomb »

Fun stuff!
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

User avatar
mtylerfl
Vectric Archimage
Posts: 5864
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: Fish Dish

Post by mtylerfl »

Nice job, Nick!
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

John1261
Posts: 2
Joined: Thu Nov 25, 2021 4:43 pm
Model of CNC Machine: onefinity woodworker 32x16

Re: Fish Dish

Post by John1261 »

my cnc x rail is 32" Y rail is 16". Can the dia of the fish plate be changed to the x rail width

User avatar
SteveNelson46
Vectric Wizard
Posts: 2275
Joined: Wed Jan 04, 2012 2:43 pm
Model of CNC Machine: Camaster Stinger 1
Location: Tucson, Az.

Re: Fish Dish

Post by SteveNelson46 »

In the material setup screen swap the X measurement (11") with the Y measurement (30") so the width (X) is 30" and the height (Y) is 11". Usiing the mouse, drag select everything. Then use the rotate tool to rotate everything all at once 90 degrees. Recalculate all toolpaths.
Steve

John1261
Posts: 2
Joined: Thu Nov 25, 2021 4:43 pm
Model of CNC Machine: onefinity woodworker 32x16

Re: Fish Dish

Post by John1261 »

thanks Steve

Post Reply