In the Labs with Vectric FREE Project - DESK LAMP

Post Reply
Stephanie Downing
Vectric Staff
Posts: 551
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

In the Labs with Vectric FREE Project - DESK LAMP

Post by Stephanie Downing »

We're going LIVE on YouTube at 3pm BST today to show you how to create this awesome Desk Lamp!

Tune in here to see how it was created!


Download the free project files here:
https://www.vectric.com/vectric-communi ... s/DeskLamp
800x800px_DeskLamp.jpg

ctbjdm
Vectric Apprentice
Posts: 86
Joined: Sat May 13, 2017 11:45 pm
Model of CNC Machine: TBD

Re: In the Labs with Vectric FREE Project - DESK LAMP

Post by ctbjdm »

This looks great!

Anyone have a source for the 60* 3/4 thread mill referenced (US based)? I found https://www.magnate.net/ProductDetails. ... ctCode=796 but it's 90* 1/4" - not sure if that matters or not.

User avatar
SteveNelson46
Vectric Wizard
Posts: 2275
Joined: Wed Jan 04, 2012 2:43 pm
Model of CNC Machine: Camaster Stinger 1
Location: Tucson, Az.

Re: In the Labs with Vectric FREE Project - DESK LAMP

Post by SteveNelson46 »

ctbjdm wrote:
Tue Jul 28, 2020 6:43 pm
This looks great!

Anyone have a source for the 60* 3/4 thread mill referenced (US based)? I found https://www.magnate.net/ProductDetails. ... ctCode=796 but it's 90* 1/4" - not sure if that matters or not.
This has been asked many times in the last week or so. Here is a link to the one Vectric used in their training video. You will need a 3/8" collet. Someone posted that the 90 degree bit actually works better but I have not tried it.

https://www.mscdirect.com/product/details/03196052
Steve

BDoerr
Posts: 1
Joined: Fri Apr 08, 2016 4:27 am
Model of CNC Machine: Shark

Re: In the Labs with Vectric FREE Project - DESK LAMP

Post by BDoerr »

Does anyone have the tool database settings for the Magnate 796 Thread Cutting tool? The 90 degree 1/4 inch bit.

Post Reply