Aaron Leedham Phone Amplifer Drawing issue

Post Reply
mrmfwilson
Vectric Craftsman
Posts: 135
Joined: Thu May 31, 2012 6:49 pm
Model of CNC Machine: Legacy Arty 36
Location: Austin, TX
Contact:

Aaron Leedham Phone Amplifer Drawing issue

Post by mrmfwilson »

Not sure where I should post this but there is a problem with the .crv file. The holes in the top inside pieces are not the same dimension as the corresponding holes in the sides. I moved the side holes to line up with the inside pieces. I have attached the files.
Attachments
phone amplifier fixed.crv
(2.74 MiB) Downloaded 160 times
CenterLine Designs
Facebook - Centerline Designs

Stephanie Downing
Vectric Staff
Posts: 232
Joined: Thu Jan 12, 2017 3:05 pm
Model of CNC Machine: xxx

Re: Aaron Leedham Phone Amplifer Drawing issue

Post by Stephanie Downing »

mrmfwilson wrote:Not sure where I should post this but there is a problem with the .crv file. The holes in the top inside pieces are not the same dimension as the corresponding holes in the sides. I moved the side holes to line up with the inside pieces. I have attached the files.
Thank you for sharing your updated file :)

Post Reply