Free Project "The Paradise Box" for VCarve Pro & Aspire!

marte
Posts: 12
Joined: Mon Aug 31, 2009 12:07 pm
Model of CNC Machine: cnc auto costruita area di lavoro 800*50

Re: Free Project "The Paradise Box" for VCarve Pro & Aspire!

Post by marte »

In fact, that's why I can not download.
There is another way to download in another format.
Thanks in advance.

jhegel
Posts: 38
Joined: Wed Jan 14, 2009 5:02 pm
Location: Ronan, Mt

Re: Free Project "The Paradise Box" for VCarve Pro & Aspire!

Post by jhegel »

Actually cut this last June to have it in time for the wedding.

John
Bryan Kenna 2.jpg

rlindholm
Posts: 9
Joined: Wed Aug 22, 2012 9:40 pm
Model of CNC Machine: Pilot Pro Plus

Re: Free Project "The Paradise Box" for VCarve Pro & Aspire!

Post by rlindholm »

Cutting box today, Had high hopes but, my slots in the sides cut to 11/16 in. wide and of course stock is .75. Have others run into this? My machine cut the parts otherwise fine. Now I am contemplating running through planner.

Ray

User avatar
mtylerfl
Vectric Archimage
Posts: 5486
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA
Contact:

Re: Free Project "The Paradise Box" for VCarve Pro & Aspire!

Post by mtylerfl »

rlindholm wrote:Cutting box today, Had high hopes but, my slots in the sides cut to 11/16 in. wide and of course stock is .75. Have others run into this? My machine cut the parts otherwise fine. Now I am contemplating running through planner.

Ray
Hi Ray,

Sorry your machine created the undersized slots. No one else has reported that problem as far as I know. The slots on that project are actually designed slightly oversize (designed width is 0.7656"). So you are actually 0.0781" less the designed amount which is fairly significant. What machine are you using? Perhaps someone else owns the same machine as you and/or can offer some ideas for things to check.
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

User avatar
MarkL
Posts: 18
Joined: Sun Nov 30, 2014 9:35 am
Model of CNC Machine: Homebuilt Gatton CNC with rotary axis
Location: Southern Oregon, USA
Contact:

Re: Free Project "The Paradise Box" for VCarve Pro & Aspire!

Post by MarkL »

I know that this is a very old thread, but a lot of people have been having a hard time finding the Brainerd hinge used in the Paradise Box project from Vectric. They are still being made, and are available.

I found them here: http://www.dlawlesshardware.com/continuoushing.html

Before ordering them online, I called them to make sure that had some in stock, and the nice lady on the phone told me that had over 2000 of them in stock. I ordered 6 of them and received them in 3 days.

If this is an inappropriate post, please delete it and accept my sincerest apologies. I have nothing to do with D. Lawless Hardware, and am not affiliated with them or anyone else in any way. Just trying to help out with a source for the part.
Double check, triple check, measure, measure, cut...

User avatar
mtylerfl
Vectric Archimage
Posts: 5486
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA
Contact:

Re: Free Project "The Paradise Box" for VCarve Pro & Aspire!

Post by mtylerfl »

Thank you for that link, Mark! I've sure been missing being able to use those hinges. They are ideal for a lot of box types and styles. Ordering some now...
Michael Tyler

carvebuddy.com

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

Custom carving
Vectric Craftsman
Posts: 108
Joined: Sat Oct 10, 2020 2:26 am
Model of CNC Machine: next wave shark 520

Re: Free Project "The Paradise Box" for VCarve Pro & Aspire!

Post by Custom carving »

i have been looking all over for this plan and when I finally find the link it says Page wont open" please report to support :(

User avatar
Adrian
Vectric Archimage
Posts: 11912
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: Free Project "The Paradise Box" for VCarve Pro & Aspire!

Post by Adrian »

Custom carving wrote:
Fri Dec 04, 2020 5:06 am
i have been looking all over for this plan and when I finally find the link it says Page wont open" please report to support :(
The link for it is now - https://www.vectric.com/vectric-communi ... aradiseBox

The original post is nearly 10 years old now and the website has been through some major rebuilds in that time so I guess a redirect got missed out along the way.

Custom carving
Vectric Craftsman
Posts: 108
Joined: Sat Oct 10, 2020 2:26 am
Model of CNC Machine: next wave shark 520

Re: Free Project "The Paradise Box" for VCarve Pro & Aspire!

Post by Custom carving »

You guys are the greatest
I want to be a “true Vectrician”
I still have a lot to learn but I really love vcarve pro. I wish I would have updated year’s ago
Now I just need to find time to be creative


Dennis

Post Reply