Bookpile Box Project

Post Reply
dhruska
Posts: 3
Joined: Tue Dec 29, 2020 2:53 am
Model of CNC Machine: Shark 2

Bookpile Box Project

Post by dhruska »

I am trying to make the Bookpile Box project from the December newsletter. I downloaded the project files and looked them over. It appears I am missing the tool path files for the second side of the two-sided carve. When I open the VERT_Two-Side_LID_and_SPINES.crv file, only the tool paths for the first side are listed. How do I get the files for the second side to cut out the bottoms?

User avatar
Adrian
Vectric Archimage
Posts: 11299
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: Bookpile Box Project

Post by Adrian »

You have to toggle to the other side. There are two toolpaths for the top side and four for the bottom side.

dhruska
Posts: 3
Joined: Tue Dec 29, 2020 2:53 am
Model of CNC Machine: Shark 2

Re: Bookpile Box Project

Post by dhruska »

Adrian,

Thank you for the reply. How do I toggle to the other side? I have no experience with two-sided programs.

SteveNelson46
Vectric Wizard
Posts: 1077
Joined: Wed Jan 04, 2012 2:43 pm
Model of CNC Machine: Camaster Stinger using WinCNC
Location: Tucson, Az.

Re: Bookpile Box Project

Post by SteveNelson46 »

Click on this button.
Attachments
Two-Sided.png
Steve

dhruska
Posts: 3
Joined: Tue Dec 29, 2020 2:53 am
Model of CNC Machine: Shark 2

Re: Bookpile Box Project

Post by dhruska »

Steve,

Thank you! That is exactly what I needed to know. I am off and running now!

Thanks,

Dave

Post Reply