post processor Anilam 6000 M
- dansfoundry
- Vectric Craftsman
- Posts: 157
- Joined: Tue Sep 01, 2009 3:11 am
- Location: New Mexico
- Contact:
post processor Anilam 6000 M
I sent this message (twice) to vectric support and did not get any feed back (not sure my email is working ), so I decided to post here. "Hi Tony or Mark, I have an Acer VMC 2040L milling center and would like to obtain a post processor to use with my Aspire. Please find attached a sample g-code. Anything you can do will be much appreciated. Thanks Dan Keith
- Mark
- Vectric Staff
- Posts: 1058
- Joined: Sat Aug 18, 2007 2:55 pm
- Model of CNC Machine: CNC Shark, ShopBot, Roland PNC3000
- Location: Alcester U.K.
- Contact:
Re: post processor Anilam 6000 M
Hello Dan,
We do not appear to have received anything from you.
I will take a look at the sample that you have attached and get back to you
when I have something.
I hope that this helps.
Cheers,
Mark.
We do not appear to have received anything from you.
I will take a look at the sample that you have attached and get back to you
when I have something.
I hope that this helps.
Cheers,
Mark.
- dansfoundry
- Vectric Craftsman
- Posts: 157
- Joined: Tue Sep 01, 2009 3:11 am
- Location: New Mexico
- Contact:
Re: post processor Anilam 6000 M
Thanks Mark. I figured you did not recieve my email. I need to get a new email server. As usual you guys are right on the Ball. Dan
-
- Posts: 12
- Joined: Mon Jun 18, 2012 6:18 am
- Model of CNC Machine: Multicam router; Anilam 6000m mill
- Location: Australia
Re: post processor Anilam 6000 M
Hello, time to resurrect an old thread.
I also have an Anilam 6000M and am searching for a post processor to run with Aspire 9.5
Is anyone able to assist me with this PP?
Thanks in advance,
Richard.
I also have an Anilam 6000M and am searching for a post processor to run with Aspire 9.5
Is anyone able to assist me with this PP?
Thanks in advance,
Richard.
-
- Posts: 12
- Joined: Mon Jun 18, 2012 6:18 am
- Model of CNC Machine: Multicam router; Anilam 6000m mill
- Location: Australia
Re: post processor Anilam 6000 M
Apparently this is a wilderness area with tumbleweeds blowing through....
Any lonely soul who passes by here looking for a post processor for an Anilam 6000M controller, feel free to contact me. I have spent considerable time making one myself. Currently suitable for both arcs and auto tool-changing.
This version is Metric.
Any lonely soul who passes by here looking for a post processor for an Anilam 6000M controller, feel free to contact me. I have spent considerable time making one myself. Currently suitable for both arcs and auto tool-changing.
This version is Metric.
- mtylerfl
- Vectric Archimage
- Posts: 5889
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: post processor Anilam 6000 M
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC