post processor Anilam 6000 M

This forum is for requests and queries about machine tool support for Vectric Products
Post Reply
User avatar
dansfoundry
Vectric Craftsman
Posts: 157
Joined: Tue Sep 01, 2009 3:11 am
Location: New Mexico
Contact:

post processor Anilam 6000 M

Post by dansfoundry »

I sent this message (twice) to vectric support and did not get any feed back (not sure my email is working :( ), so I decided to post here. "Hi Tony or Mark, I have an Acer VMC 2040L milling center and would like to obtain a post processor to use with my Aspire. Please find attached a sample g-code. Anything you can do will be much appreciated. Thanks Dan Keith
Attachments
anilam pp.bmp.jpg

User avatar
Mark
Vectric Staff
Posts: 1052
Joined: Sat Aug 18, 2007 2:55 pm
Model of CNC Machine: CNC Shark, ShopBot, Roland PNC3000
Location: Alcester U.K.
Contact:

Re: post processor Anilam 6000 M

Post by Mark »

Hello Dan,

We do not appear to have received anything from you.
I will take a look at the sample that you have attached and get back to you
when I have something.

I hope that this helps.

Cheers,

Mark.

User avatar
dansfoundry
Vectric Craftsman
Posts: 157
Joined: Tue Sep 01, 2009 3:11 am
Location: New Mexico
Contact:

Re: post processor Anilam 6000 M

Post by dansfoundry »

Thanks Mark. I figured you did not recieve my email. I need to get a new email server. As usual you guys are right on the Ball. Dan

Richard93Vogue
Posts: 12
Joined: Mon Jun 18, 2012 6:18 am
Model of CNC Machine: Multicam router; Anilam 6000m mill
Location: Australia

Re: post processor Anilam 6000 M

Post by Richard93Vogue »

Hello, time to resurrect an old thread.

I also have an Anilam 6000M and am searching for a post processor to run with Aspire 9.5

Is anyone able to assist me with this PP?

Thanks in advance,
Richard.

Richard93Vogue
Posts: 12
Joined: Mon Jun 18, 2012 6:18 am
Model of CNC Machine: Multicam router; Anilam 6000m mill
Location: Australia

Re: post processor Anilam 6000 M

Post by Richard93Vogue »

Apparently this is a wilderness area with tumbleweeds blowing through....

Any lonely soul who passes by here looking for a post processor for an Anilam 6000M controller, feel free to contact me. I have spent considerable time making one myself. Currently suitable for both arcs and auto tool-changing.
This version is Metric.

User avatar
mtylerfl
Vectric Archimage
Posts: 5864
Joined: Thu Jan 29, 2009 3:54 am
Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
Location: Brunswick, GA

Re: post processor Anilam 6000 M

Post by mtylerfl »

Hi Richard,

You probably should contact Vectric Tech Support directly.

support@vectric.com
Michael Tyler

facebook.com/carvebuddy

-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC

Post Reply