Hello!
I am from korea.
I need help how to making a pp for fagor 8070 controller.
In case of fagor 8070 controller, to control the feed, I want to input the code "#HSC ON [CONTERROR 0.001] at first block of an nc data like the below;
; Output created by Vectric
;
#MCS Z0
G90
D1
G54
#HSC ON [CONTERROR 0.001]
S12000M3
G4 K5
G0X0.000Y0.000
G0Z20.000
G0X36.449Y85.644Z6.000
G1Z-6.350F762
G1X39.624F2540
Please help me how to modify the pp.
Best regards,
Seungwoo Lee of Solar Tech
How to modify the PP for Fagor8070 controller
-
- Posts: 1
- Joined: Wed Apr 29, 2009 12:16 am
How to modify the PP for Fagor8070 controller
- Attachments
-
- SHTFagor_8070_Arcs_mm.pp
- (4.02 KiB) Downloaded 212 times
- Adrian
- Vectric Archimage
- Posts: 14690
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: How to modify the PP for Fagor8070 controller
Have a look at this guide. http://www.vectric.com/forum/viewtopic.php?f=4&t=6213
That should give you all the information you need.
That should give you all the information you need.