I have question if I may I am testing Trial version of V carve.
Post for Cosmec router that I have at work has .xpi extention will this work to cut sample files?
Holz-Her Cosmec
- Thkoutsidthebox
- Vectric Wizard
- Posts: 1487
- Joined: Wed Oct 25, 2006 3:19 pm
- Location: Europe
Re: Holz-Her Cosmec
I'm afraid I cant offer any help on that extension or router. You should send an email to support (@) vectric (dot) com
Re: Holz-Her Cosmec
I have e=mailed Vectric. I also did speak to holz her tech, as` per him this extention will not work.....
He recommended vCarve and all Vectric software in first place.
He recommended vCarve and all Vectric software in first place.
Re: Holz-Her Cosmec
Thanks Vectric for great tech support as they have e-mailed post.
Great job guys and Merry Christmas!!!!!!
Great job guys and Merry Christmas!!!!!!
-
- Posts: 2
- Joined: Fri Feb 03, 2023 7:14 am
- Model of CNC Machine: Holz-Her Cosmec Conquest 250/510 NUM1020
Re: Holz-Her Cosmec
Wondering if I could piggy back on this post. I'm looking for a function post for a Holz-Her Cosmec Conquest 250 / 510 in metric running on the NUM 1020 controller with an ATC.
Was this the post they sent you? And did you get it to work properly?
Was this the post they sent you? And did you get it to work properly?
- Rcnewcomb
- Vectric Archimage
- Posts: 5928
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Holz-Her Cosmec
I'm not sure if you will get a response. This is a 15 year old thread. Big-Tex has not been on the forum in the past 7 years and his web site is not longer active.
It might be best to send an email to support@vectric.com
It might be best to send an email to support@vectric.com
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- adze_cnc
- Vectric Wizard
- Posts: 4380
- Joined: Sat Jul 27, 2013 10:08 pm
- Model of CNC Machine: AXYZ 4008
- Location: Vancouver, BC, Canada
Re: Holz-Her Cosmec
This file may be of use. It looks almost too complete as it is lifts all drills and sets some pins, etc. But at least it's a start and the author's e-mail address is there.
-
- Posts: 2
- Joined: Fri Feb 03, 2023 7:14 am
- Model of CNC Machine: Holz-Her Cosmec Conquest 250/510 NUM1020
Re: Holz-Her Cosmec
Thanks guys,
Vectric was not helpful. They suggested I try the post that is included stock in vcarve pro but it wouldn't work for me when I ran some gcode to the cnc machine with it.
Thanks for the file download suggestion. It would not import into Vcarve and I got this error in the picture below.
Vectric was not helpful. They suggested I try the post that is included stock in vcarve pro but it wouldn't work for me when I ran some gcode to the cnc machine with it.
Thanks for the file download suggestion. It would not import into Vcarve and I got this error in the picture below.