Holz-Her Cosmec

This forum is for requests and queries about machine tool support for Vectric Products
Post Reply
Big-Tex
Posts: 43
Joined: Sun Dec 21, 2008 10:33 pm
Location: Plano, TX

Holz-Her Cosmec

Post by Big-Tex »

I have question if I may I am testing Trial version of V carve.
Post for Cosmec router that I have at work has .xpi extention will this work to cut sample files?
Wood --> nature created, never duplicated......

http://campbelldesigns.net/

User avatar
Thkoutsidthebox
Vectric Wizard
Posts: 1487
Joined: Wed Oct 25, 2006 3:19 pm
Location: Europe

Re: Holz-Her Cosmec

Post by Thkoutsidthebox »

I'm afraid I cant offer any help on that extension or router. You should send an email to support (@) vectric (dot) com

Big-Tex
Posts: 43
Joined: Sun Dec 21, 2008 10:33 pm
Location: Plano, TX

Re: Holz-Her Cosmec

Post by Big-Tex »

I have e=mailed Vectric. I also did speak to holz her tech, as` per him this extention will not work.....


He recommended vCarve and all Vectric software in first place.
Wood --> nature created, never duplicated......

http://campbelldesigns.net/

Big-Tex
Posts: 43
Joined: Sun Dec 21, 2008 10:33 pm
Location: Plano, TX

Re: Holz-Her Cosmec

Post by Big-Tex »

Thanks Vectric for great tech support as they have e-mailed post.

Great job guys and Merry Christmas!!!!!!
Wood --> nature created, never duplicated......

http://campbelldesigns.net/

SaltySnow
Posts: 2
Joined: Fri Feb 03, 2023 7:14 am
Model of CNC Machine: Holz-Her Cosmec Conquest 250/510 NUM1020

Re: Holz-Her Cosmec

Post by SaltySnow »

Wondering if I could piggy back on this post. I'm looking for a function post for a Holz-Her Cosmec Conquest 250 / 510 in metric running on the NUM 1020 controller with an ATC.

Was this the post they sent you? And did you get it to work properly?

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5886
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: Holz-Her Cosmec

Post by Rcnewcomb »

I'm not sure if you will get a response. This is a 15 year old thread. Big-Tex has not been on the forum in the past 7 years and his web site is not longer active.

It might be best to send an email to support@vectric.com
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

User avatar
adze_cnc
Vectric Wizard
Posts: 4324
Joined: Sat Jul 27, 2013 10:08 pm
Model of CNC Machine: AXYZ 4008
Location: Vancouver, BC, Canada

Re: Holz-Her Cosmec

Post by adze_cnc »

This file may be of use. It looks almost too complete as it is lifts all drills and sets some pins, etc. But at least it's a start and the author's e-mail address is there.

SaltySnow
Posts: 2
Joined: Fri Feb 03, 2023 7:14 am
Model of CNC Machine: Holz-Her Cosmec Conquest 250/510 NUM1020

Re: Holz-Her Cosmec

Post by SaltySnow »

Thanks guys,

Vectric was not helpful. They suggested I try the post that is included stock in vcarve pro but it wouldn't work for me when I ran some gcode to the cnc machine with it.

Thanks for the file download suggestion. It would not import into Vcarve and I got this error in the picture below.
Attachments
Vcarve Post import error.png

Post Reply