A change of direction from my RatRig...
Would someone be kind enough to tell me where I can get the latest Vectric V-Carve (v11.5) post processors for my Stepcraft M.1000, please?
I've been watching this Stepcraft video on YouTube....
...and the Stepcraft2 post processors are shown at 9:47 where it is recommended to download the ones provided, but doesn't tell me from where. They are also shown at 9:56. A screenshot from the video are shown below.
Thank you.
Stepcraft M.1000 Post Processors
-
- Vectric Craftsman
- Posts: 193
- Joined: Sat May 21, 2022 11:39 am
- Model of CNC Machine: Stepcraft M.1000
- Location: North Wiltshire, United Kindgom
Stepcraft M.1000 Post Processors
Be wary of taking the advice of someone who thinks he knows what he's doing, and don't listen to me!
-
- Vectric Wizard
- Posts: 1013
- Joined: Fri May 15, 2015 1:10 pm
- Model of CNC Machine: 3 axis small size machine
- Location: France
Re: Stepcraft M.1000 Post Processors
Hi,
Did you ask your Stepcraft seller?
From the comments of the Youtube video:
Did you ask your Stepcraft seller?
From the comments of the Youtube video:
This Video explains how to install the Stepcraft-Post Processors on the new Vectric V11 software.
The Multi-Installer is available from your local Stepcraft dealer
-
- Vectric Craftsman
- Posts: 193
- Joined: Sat May 21, 2022 11:39 am
- Model of CNC Machine: Stepcraft M.1000
- Location: North Wiltshire, United Kindgom
Re: Stepcraft M.1000 Post Processors
Actually, I’ve asked Stepcraft and Vectric Support, but as it’s the Easter holidays and they’re both (understandably) on shutdown, I thought I’d ask here, too.
They don’t appear to be included with the installer I was provided with.
Thanks
They don’t appear to be included with the installer I was provided with.
Thanks
Be wary of taking the advice of someone who thinks he knows what he's doing, and don't listen to me!
Re: Stepcraft M.1000 Post Processors
Did you resolved this issue?