When I upgraded from 10.5to 11.5 my Post Processor is not supported. Below is what it tells me...
VCarve Pro
[Configuration PP]
Post_Base is no longer supported. Please update your postto the latest version, or merge it with the base post "Grbl_inch.pp" on line 27 of file.
C:ProgramData\Vectric\VCarve Pro\V11.5\My_PostP\X-Carve_inch.pp Line
Post_Base = "Grbl_inch.pp"
Can someone help me with my issue, Please
Upgrade from V10.5 to V11.503
-
- Posts: 5
- Joined: Sun Apr 16, 2017 4:00 pm
- Model of CNC Machine: X Carve
- adze_cnc
- Vectric Wizard
- Posts: 4380
- Joined: Sat Jul 27, 2013 10:08 pm
- Model of CNC Machine: AXYZ 4008
- Location: Vancouver, BC, Canada
Re: Upgrade from V10.5 to V11.503
As it’s in the MyPost folder I would do someth8ng like this:
- move everything in the MyPost folder to another folder for safe keeping
- within 11.5 create a new machine entry selecting a new post processor appropriate to the machine
- if you have made any changes to the old v10 post you can find the newly created v11.5 for your newly created machine and edit it
-
- Posts: 5
- Joined: Sun Apr 16, 2017 4:00 pm
- Model of CNC Machine: X Carve
Re: Upgrade from V10.5 to V11.503
adze,
I followed your direction and the Configuration PP is still showing up.
I have an open build machine 1515, however I am using the Xcontroller to run the programs not the black box that Open Builds sells. Will this make a difference?
I followed your direction and the Configuration PP is still showing up.
I have an open build machine 1515, however I am using the Xcontroller to run the programs not the black box that Open Builds sells. Will this make a difference?
-
- Posts: 5
- Joined: Sun Apr 16, 2017 4:00 pm
- Model of CNC Machine: X Carve
Re: Upgrade from V10.5 to V11.503
adze,
Sorry, I do not have an Open Build. I ordered from Bulk Man 3D the lead CNC machine. My controller is from XCarve. (X-Controller)
This is not in the manufactures drop down list.
Sorry about the confusion on my part.
Sorry, I do not have an Open Build. I ordered from Bulk Man 3D the lead CNC machine. My controller is from XCarve. (X-Controller)
This is not in the manufactures drop down list.
Sorry about the confusion on my part.
- Adrian
- Vectric Archimage
- Posts: 14684
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Upgrade from V10.5 to V11.503
Here is a sticky post on the subject from Vectric - viewtopic.php?f=2&t=37977