Tormach post processor

This forum is for requests and queries about machine tool support for Vectric Products
Post Reply
hmatyas
Vectric Apprentice
Posts: 96
Joined: Sun Sep 06, 2015 2:49 am
Model of CNC Machine: Shark HD3

Tormach post processor

Post by hmatyas »

Does Aspire have a post processor for a Tormach?

Thank you.

User avatar
Adrian
Vectric Archimage
Posts: 14544
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: Tormach post processor

Post by Adrian »

The PathPilot ones that come with the Vectric software are the correct ones according to the Tormach website - https://tormach.com/support/software/po ... -downloads

hmatyas
Vectric Apprentice
Posts: 96
Joined: Sun Sep 06, 2015 2:49 am
Model of CNC Machine: Shark HD3

Re: Tormach post processor

Post by hmatyas »

Adrain

Thank you, I was not sure if it was that one or Mach3.
I belong to a makerspace that has the Tormach 770 and
I really don't use the machine. However we have Vcarve Pro Makerspace
Edition and a member was wondering what post processor to use.
He wanted to do nesting which he could not do with the software that he was using.
I will forward this information to him and ask for caution with his first cut.

:D Thanks again.

Harvey

Post Reply