Does Aspire have a post processor for a Tormach?
Thank you.
Tormach post processor
- Adrian
- Vectric Archimage
- Posts: 14544
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Tormach post processor
The PathPilot ones that come with the Vectric software are the correct ones according to the Tormach website - https://tormach.com/support/software/po ... -downloads
-
- Vectric Apprentice
- Posts: 96
- Joined: Sun Sep 06, 2015 2:49 am
- Model of CNC Machine: Shark HD3
Re: Tormach post processor
Adrain
Thank you, I was not sure if it was that one or Mach3.
I belong to a makerspace that has the Tormach 770 and
I really don't use the machine. However we have Vcarve Pro Makerspace
Edition and a member was wondering what post processor to use.
He wanted to do nesting which he could not do with the software that he was using.
I will forward this information to him and ask for caution with his first cut.
Thanks again.
Harvey
Thank you, I was not sure if it was that one or Mach3.
I belong to a makerspace that has the Tormach 770 and
I really don't use the machine. However we have Vcarve Pro Makerspace
Edition and a member was wondering what post processor to use.
He wanted to do nesting which he could not do with the software that he was using.
I will forward this information to him and ask for caution with his first cut.
Thanks again.
Harvey