Post Help?

This forum is for requests and queries about machine tool support for Vectric Products
Post Reply
calwilliams63
Posts: 2
Joined: Mon Sep 06, 2021 3:25 am
Model of CNC Machine: SCM

Post Help?

Post by calwilliams63 »

Hello, this is my first post on here. I recently purchased V-Carve but am looking for the post for my machine. I own a custom cabinet shop so I have an industrial machine but was wanting to get into doing some small projects as gifts for customers, friends or family. I have a SCM Morbidelli N100 with a 5x12 table. Any help would be greatly appreciated. Thanks in advance!

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5887
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: Post Help?

Post by Rcnewcomb »

There are 3 to choose from:
Screen Shot 2021-12-05 at 4.49.16 PM.png
Have you tried any of them?

There are also 3 SCM post processors.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

User avatar
adze_cnc
Vectric Wizard
Posts: 4329
Joined: Sat Jul 27, 2013 10:08 pm
Model of CNC Machine: AXYZ 4008
Location: Vancouver, BC, Canada

Re: Post Help?

Post by adze_cnc »

Also. I seem to remember that someone posted a similar request. So a search for SCM Morbidelli should find it.

Post Reply