Hello, Ive been asked by support: "...send a copy of the post processor output you ran on your machine for this file please so I can check the validity of the toolpath output please". Can i please get some guidance on how to find this output.
Being a newby, i dont know how to find this. I usually send my work directly to machine using VTransfer (pp= Vcarve (mm).
How to find PP output?
-
- Posts: 3
- Joined: Thu May 27, 2021 1:21 am
- Model of CNC Machine: BlueCarve Turbo 2.2kw
-
- Posts: 3
- Joined: Thu May 27, 2021 1:21 am
- Model of CNC Machine: BlueCarve Turbo 2.2kw
- Rcnewcomb
- Vectric Archimage
- Posts: 5915
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: How to find PP output?
On the save toolpath dialog UNcheck the option to "Output direct to machine".
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop