How to find PP output?

This forum is for requests and queries about machine tool support for Vectric Products
Post Reply
SteveScott
Posts: 3
Joined: Thu May 27, 2021 1:21 am
Model of CNC Machine: BlueCarve Turbo 2.2kw

How to find PP output?

Post by SteveScott »

Hello, Ive been asked by support: "...send a copy of the post processor output you ran on your machine for this file please so I can check the validity of the toolpath output please". Can i please get some guidance on how to find this output.

Being a newby, i dont know how to find this. I usually send my work directly to machine using VTransfer (pp= Vcarve (mm).

SteveScott
Posts: 3
Joined: Thu May 27, 2021 1:21 am
Model of CNC Machine: BlueCarve Turbo 2.2kw

Re: How to find PP output?

Post by SteveScott »

SteveScott wrote:
Mon Aug 02, 2021 9:18 pm
EDIT >>> (pp= Xcarve (mm).

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5864
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: How to find PP output?

Post by Rcnewcomb »

On the save toolpath dialog UNcheck the option to "Output direct to machine".
Attachments
Screen Shot 2021-08-02 at 4.38.58 PM.png
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

Post Reply