Where can I find Mach4 post processor, My drop down list does not appear to contain them.
Thanks
Lost Mach4 PP
- Len-Tikular
- Vectric Wizard
- Posts: 415
- Joined: Sat Feb 13, 2010 11:27 am
- Model of CNC Machine: Home made revision 3
- Location: Denholm Scotland.
Lost Mach4 PP
Len-Tikular (A glider pilots dream cloud)
Aspire 10.5
Mach4 Hobby
Ess Smoothstepper + C11g+C10s
Aspire 10.5
Mach4 Hobby
Ess Smoothstepper + C11g+C10s
- Mark
- Vectric Staff
- Posts: 1058
- Joined: Sat Aug 18, 2007 2:55 pm
- Model of CNC Machine: CNC Shark, ShopBot, Roland PNC3000
- Location: Alcester U.K.
- Contact:
Re: Lost Mach4 PP
Hello,
Mach4 is reported to be 100% compatible with Mach3 code, the Mach2/3 post processors
should work fine with Mach4.
Cheers,
Mark.
Mach4 is reported to be 100% compatible with Mach3 code, the Mach2/3 post processors
should work fine with Mach4.
Cheers,
Mark.
- Len-Tikular
- Vectric Wizard
- Posts: 415
- Joined: Sat Feb 13, 2010 11:27 am
- Model of CNC Machine: Home made revision 3
- Location: Denholm Scotland.
Re: Lost Mach4 PP
Thanks
Len-Tikular (A glider pilots dream cloud)
Aspire 10.5
Mach4 Hobby
Ess Smoothstepper + C11g+C10s
Aspire 10.5
Mach4 Hobby
Ess Smoothstepper + C11g+C10s