Hello everybody,
I found another bug that prevented the postprocessor from reading.
In version 10 it is possible to load post processors with ä, ü, ö in the name.
In version 10.5xx, the postprocessor name cannot contain ä, ö, ü
Also with the parameter POST_NAME =
these characters may not be used
Dieter
PostProcessor Problem
- Rcnewcomb
- Vectric Archimage
- Posts: 5927
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: PostProcessor Problem
Make sure to send this into support@vectric.com
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- DJ-Bino
- Vectric Craftsman
- Posts: 112
- Joined: Tue Apr 15, 2008 4:34 pm
- Model of CNC Machine: Versatil 1800
- Location: Germany
Re: PostProcessor Problem
Hi Randall,
It is a PP from a customer. Mohamed already knows.
It is a customized PP that also works if you rename it.
It has an ä in the name and also for the variable
POST_NAME = is an ä in the name.
This worked well until version 10.22
From version 10.5xx this no longer works.
Here is another example:
Milling = Fräsen in German Translation
Mach3 fräsen 3Axis.PP (that's the PP Name)
POST_NAME = "Mach3 fräsen 3Axis (* .nc)" (that's the variable)
If I rename the PP to Mach3 fraesen 3Axis.PP and change the variable to POST_NAME = "Mach3 fraesen 3Axis (* .nc)" then everything is OK in version 10.5xxx
I think Aspire 10.5xx has Problems with the charter äÄ, öÖ, üÜ
Thanks
Dieter
- Adrian
- Vectric Archimage
- Posts: 14680
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: PostProcessor Problem
The processor does actually work but it displays as a blank name in the list.
- DJ-Bino
- Vectric Craftsman
- Posts: 112
- Joined: Tue Apr 15, 2008 4:34 pm
- Model of CNC Machine: Versatil 1800
- Location: Germany
Re: PostProcessor Problem
Hi Adrian,
I knew it was working. I just had to rename it. Both the name and the variable POST_NAME =
Otherwise nothing had to be changed.
Thanks Dieter
I knew it was working. I just had to rename it. Both the name and the variable POST_NAME =
Otherwise nothing had to be changed.
Thanks Dieter