Holz-Her_Conquest_ATC_Inch"

This forum is for requests and queries about machine tool support for Vectric Products
Post Reply
paulwgrubb
Posts: 6
Joined: Sat Apr 18, 2020 9:18 pm
Model of CNC Machine: cosmec conquest 510

Holz-Her_Conquest_ATC_Inch"

Post by paulwgrubb »

Hello,
I have a small problem with my post processor and wanted to see if you could help me correct it. I am using the "Holz-Her_Conquest_ATC_Inch" post and there is 1 line of text my machine does not understand. See screen shot attached. I opened the program in notepad and closed the parenthesis after "END MILL" and it ran correctly. How can I fix this in the post? Any help would be apprecated.
Thanks,
Paul
Attachments
2020-04-20.png

User avatar
Adrian
Vectric Archimage
Posts: 14503
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: Holz-Her_Conquest_ATC_Inch"

Post by Adrian »

There are two options. One is to amend the post processor itself and the other is to just change the tool name in the tool database.

In the post process it's the "([TOOLNAME])" lines that you need to amend or remove. There is a post processor editing guide on the Help menu in the software.

Post Reply