post processor for DSP Richauto A18 S

This forum is for requests and queries about machine tool support for Vectric Products
Post Reply
hulea@gmail.com
Posts: 2
Joined: Tue Mar 03, 2020 9:59 pm
Model of CNC Machine: TJ 1325

post processor for DSP Richauto A18 S

Post by hulea@gmail.com »

Good to everybody! I need pp for controller 4 axys, Richauto A18s.
can anyone help me with this problem, please?

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5864
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: post processor for DSP Richauto A18 S

Post by Rcnewcomb »

If it uses G-code start with one of the G-code post processors.

You will probably need to modify it to support your rotary axis. In the program look under Help for the guide to editing a post-processor. It is not as scary as it sounds.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

hulea@gmail.com
Posts: 2
Joined: Tue Mar 03, 2020 9:59 pm
Model of CNC Machine: TJ 1325

Re: post processor for DSP Richauto A18 S

Post by hulea@gmail.com »

ok- I'll try, but I'm not that experienced, I'm a beginner

Post Reply