Good to everybody! I need pp for controller 4 axys, Richauto A18s.
can anyone help me with this problem, please?
post processor for DSP Richauto A18 S
-
- Posts: 2
- Joined: Tue Mar 03, 2020 9:59 pm
- Model of CNC Machine: TJ 1325
- Rcnewcomb
- Vectric Archimage
- Posts: 5927
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: post processor for DSP Richauto A18 S
If it uses G-code start with one of the G-code post processors.
You will probably need to modify it to support your rotary axis. In the program look under Help for the guide to editing a post-processor. It is not as scary as it sounds.
You will probably need to modify it to support your rotary axis. In the program look under Help for the guide to editing a post-processor. It is not as scary as it sounds.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
-
- Posts: 2
- Joined: Tue Mar 03, 2020 9:59 pm
- Model of CNC Machine: TJ 1325
Re: post processor for DSP Richauto A18 S
ok- I'll try, but I'm not that experienced, I'm a beginner