Shapeoko Post Processors

This forum is for requests and queries about machine tool support for Vectric Products
Post Reply
MikeUSNRet
Vectric Craftsman
Posts: 215
Joined: Wed Apr 21, 2010 3:51 pm

Shapeoko Post Processors

Post by MikeUSNRet »

Shapeoko has recently introduced a bit setter that will re-zero Z after each tool change, but the shapeoko PP's do not allow for toolchanges to be in the same saved file. Looking for a PP that will work with GRBL on the shapeoko and allow for multiple tools in the same file or a way to edit the current PP's etc.
STGC(SW/AW) M. Wenman USN Ret.
1982 - 2005

User avatar
Adrian
Vectric Archimage
Posts: 14503
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: Shapeoko Post Processors

Post by Adrian »

There is a guide to editing post processors on the Help menu in Cut2D/VCarve/Aspire.

454deisgnworks
Posts: 3
Joined: Sun Aug 05, 2018 11:59 pm
Model of CNC Machine: shapeoko 3

Re: Shapeoko Post Processors

Post by 454deisgnworks »

This one has the tool change option already done.
https://github.com/neilferreri/V-Carve-PPs

Post Reply