Zun g3 post process

This forum is for requests and queries about machine tool support for Vectric Products
Post Reply
qute
Posts: 1
Joined: Fri Jun 21, 2019 9:42 pm
Model of CNC Machine: zund g3 rm-a 1kw

Zun g3 post process

Post by qute »

Hello, my first post here!

We have the Zund G3 RM-A and I was wondering if you can help me with relieve routing.
I need a post process for this machine.

Our goal is to route 2.5D relieves on forex and acrylic 5-10mm too start with.

Can you help me with the software and steeps to send the .plt file to the router under safe conditions? (CAM, command line, communication interface)?
Can you help me in the creation of the tool-path settings?

Thanks in advance.

User avatar
TReischl
Vectric Wizard
Posts: 4567
Joined: Thu Jan 18, 2007 6:04 pm
Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
Location: Leland NC

Re: Zun g3 post process

Post by TReischl »

REQUESTS LIKE THIS ARE BEST SENT TO VECTRIC SUPPORT.
"If you see a good fight, get in it." Dr. Vernon Johns

Post Reply