Help PP Masterwood

This forum is for requests and queries about machine tool support for Vectric Products
Post Reply
Tiago13
Posts: 3
Joined: Thu Oct 20, 2016 3:21 pm
Model of CNC Machine: Masterwood

Help PP Masterwood

Post by Tiago13 »

Hi,
my computer died, and i lost everything.
does anyone has a working postprocessor for masterwood machines, i`ve tried several but they are not correct.
thank `s
Tiago

ger21
Vectric Wizard
Posts: 1565
Joined: Sun Sep 16, 2007 2:59 pm
Model of CNC Machine: Custom DIY
Location: Shelby Township, MI, USA
Contact:

Re: Help PP Masterwood

Post by ger21 »

What model machine do you have, or what control do you have?
There are lots of different Masterwood machines, many requiring different posts.
Gerry - http://www.thecncwoodworker.com

LittleGreyMan
Vectric Apprentice
Posts: 918
Joined: Fri May 15, 2015 1:10 pm
Model of CNC Machine: 3 axis small size machine
Location: France

Re: Help PP Masterwood

Post by LittleGreyMan »

Tiago,

I'm sincerely sorry, but if you don't have a backup strategy, be sure you'll encounter another computer crash sooner or later.

Did you try connecting the hard drive of the old computer to a new one to see if you can rescue data?
Best regards

Didier

W7 - Aspire 8.517

Tiago13
Posts: 3
Joined: Thu Oct 20, 2016 3:21 pm
Model of CNC Machine: Masterwood

Re: Help PP Masterwood

Post by Tiago13 »

Hi,
my machine is a 416k mw310 cn10 controller.
thank s all help is apreciated .

Tiago13
Posts: 3
Joined: Thu Oct 20, 2016 3:21 pm
Model of CNC Machine: Masterwood

Re: Help PP Masterwood

Post by Tiago13 »

Already tried everything, the computer is dead, luckly the company that sold the machine provided the masterwork software.
thank s

Post Reply