Hi,
I am using the default GRBL post processor on my home built cnc. I want to slow down the first rapid move from the home position to the first cut position and I'm figuring I do this in the post processor file but I'm not sure how. I have opened the file and looked for the obvious. I have read the PP guide but cant quite get my head around what I need to do.
Thanks in anticipation for any direction given.
Cheers
Daryl
GRBL Post Processor
- hooked
- Vectric Apprentice
- Posts: 60
- Joined: Mon Oct 12, 2015 10:06 pm
- Model of CNC Machine: SCRATCH BUILT CNC ROUTER
- Location: Paradise Beach - Australia
- Contact:
Re: GRBL POST PROCESSOR
Me again,
As soon as I walked away from posting the above......it came to me. I probably have to alter the rapid feed setting in GRBL.
Cheers
Daryl
As soon as I walked away from posting the above......it came to me. I probably have to alter the rapid feed setting in GRBL.
Cheers
Daryl
-
- Vectric Craftsman
- Posts: 286
- Joined: Fri May 29, 2015 1:51 am
- Model of CNC Machine: Shop-Made Router
- Location: Arizona
Re: GRBL POST PROCESSOR
Rapid move speed, along with acceleration, is set by your machine controller.
EDIT: We were typing at the same time, yes you figured it out.
EDIT: We were typing at the same time, yes you figured it out.