I am looking for a post processor for an Onsrud 96C 10 D router. It has dual tables, vacuum and an ATC.
Bill
Onsrud 96C 10 D postprocessor
-
Mark
- Vectric Staff
- Posts: 1058
- Joined: Sat Aug 18, 2007 2:55 pm
- Model of CNC Machine: CNC Shark, ShopBot, Roland PNC3000
- Location: Alcester U.K.
- Contact:
Re: Onsrud 96C 10 D postprocessor
Hello Bill,
I am afraid that we do not have a specific post processor for the model that
you have mentioned. Hopefully one of our standard CR-Onsrud post processors
will work, (these include the name of the control that they were written for
in the name of the post processor).
If one of these post processors do not work, please send a copy of the documentation of the code format, along with a sample of code that runs well
on the machine, into support. We will take a look at this and let you know
if we would be able to produce a suitable post processor for this machine.
I hope that this helps.
Cheers,
Mark.
I am afraid that we do not have a specific post processor for the model that
you have mentioned. Hopefully one of our standard CR-Onsrud post processors
will work, (these include the name of the control that they were written for
in the name of the post processor).
If one of these post processors do not work, please send a copy of the documentation of the code format, along with a sample of code that runs well
on the machine, into support. We will take a look at this and let you know
if we would be able to produce a suitable post processor for this machine.
I hope that this helps.
Cheers,
Mark.