ATC mm Post-processor for Syntec

This forum is for requests and queries about machine tool support for Vectric Products
Post Reply
User avatar
Norb
Vectric Craftsman
Posts: 202
Joined: Wed Aug 05, 2009 8:07 pm
Model of CNC Machine: MAXI-C 1530 SE-T-V
Location: Barbados

ATC mm Post-processor for Syntec

Post by Norb »

Tony Mac wrote a post-processor for my Syntec controlled machine with ATC.... I have now tried it for several small jobs and tests and it works very well.

Althought I use it specifically with a MAXICAM machine having a rack-type ATC and Syntec controller running Syntec 900 ME, it should work with an Excitech router as well. However, trial is at your own risk.

In case other Vectric members have a need for it, they can retrieve it here http://dl.dropbox.com/u/2043845/Syntec_ ... _ATC_mm.pp

Cheers
Norbert
Aspire 4.x, PartMasterCAM Turn, Autocabinets
after hours: Sherline 2010 and 4410

Post Reply