Help: Post Processor Pratix S12 with ATC

This forum is for requests and queries about machine tool support for Vectric Products
Post Reply
JasonbalmWCW
Posts: 6
Joined: Thu Feb 27, 2020 4:01 am
Model of CNC Machine: SCM Pratix S15

Help: Post Processor Pratix S12 with ATC

Post by JasonbalmWCW »

Is anyone here using Vcarve on their SCM Pratix S12 running Xilog and ATC? (I have a 2012 model) The existing posts that come with Vcarve do not work for my machine and I am not at a skill level to fully understand modifying the post even with the help document. I am working with Customer Service currently, but with all the back and forth so far, we have not resolved it yet. I thought I would reach out here to see if someone in the community has a working post they would be willing to share.

We run other software. I have shared that actual post with them and side by side gcode of the same part so they can compare the output.

Any help will be much appreciated. Thank you.

Jason
Waukee CabinetWorks

JasonbalmWCW
Posts: 6
Joined: Thu Feb 27, 2020 4:01 am
Model of CNC Machine: SCM Pratix S15

Re: Help: Post Processor Pratix S12 with ATC

Post by JasonbalmWCW »

Update: Customer service was great help in working on this, but the SCM machine and its configuration can be confusing and tweaking the post is a bit of a rabbit hole. Through this process, I found out that SCM sells a post processor this is tested and ready to go for vcarve/aspire. They created it at the end of 2019. I went ahead and purchased it ($400..grrr) Works perfectly as long as the datum is set to the lower left and top of material is Z. It also includes a SCM specific menu that pops up after saving the file to tweak offsets and adjust a few other settings before actually saving the file to your file location. The gcode files are super organized including tool notes and other info in a condensed easy to read format. Highly recommend it...but wish it wasn't $400!

User avatar
Adrian
Vectric Archimage
Posts: 11299
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: Help: Post Processor Pratix S12 with ATC

Post by Adrian »

Holy cow, $400 and it restricts your home position and material Z?

JasonbalmWCW
Posts: 6
Joined: Thu Feb 27, 2020 4:01 am
Model of CNC Machine: SCM Pratix S15

Re: Help: Post Processor Pratix S12 with ATC

Post by JasonbalmWCW »

Unfortunately that appears to be the case. The pop up menu I mentioned allows for offsetting the project, so that appears to be a work around. The forced Z for the top of material is more due to the way SCM machines handle Z. Its different than most machines.

574melvin
Posts: 3
Joined: Wed Apr 15, 2020 10:37 pm
Model of CNC Machine: Morbidelli Author 636 top

Re: Help: Post Processor Pratix S12 with ATC

Post by 574melvin »

I have a SCM Morbidelli 630 top. I am using a post for Vcarve that someone helped me with. I just have one issue that I would like to improve on. After every cut it bobs up and down before going to the next cut. Does yours do that? Could I see a copy of your post or would you look at mine and help me with my problem?

Thanks

JasonbalmWCW
Posts: 6
Joined: Thu Feb 27, 2020 4:01 am
Model of CNC Machine: SCM Pratix S15

Re: Help: Post Processor Pratix S12 with ATC

Post by JasonbalmWCW »

Mine was doing that with the posts I was getting from Vectric customer service. Wierd movements...

The post I purchased from SCM completely solved the issue and really cemented my trust in it working in all situations. I would highly recommend purchasing the post from them. It was developed specifically for scm machines.

I can't send the post itself, but if you want to attach a simple vcarve job file, I would be happy to gcode it with that post and send you the gcode file to compare to what your getting with your post. Customer service could help you make adjustments to your post to get similar results.

574melvin
Posts: 3
Joined: Wed Apr 15, 2020 10:37 pm
Model of CNC Machine: Morbidelli Author 636 top

Re: Help: Post Processor Pratix S12 with ATC

Post by 574melvin »

Here is a sample file if you notice in the gcode that I sent, it does a wierd movement instead of just going to the next point. I will include the actual crv file and the xxl file. For some reason it is not letting me attach a xxl file do I channged it to a txt in order to send it.
Thanks for helping!
Attachments
Dwayne door.crv
(82.5 KiB) Downloaded 27 times
picket fence door.txt
(4.55 KiB) Downloaded 38 times

JasonbalmWCW
Posts: 6
Joined: Thu Feb 27, 2020 4:01 am
Model of CNC Machine: SCM Pratix S15

Re: Help: Post Processor Pratix S12 with ATC

Post by JasonbalmWCW »

Here is the XXL File: https://waukeecabinetworks-my.sharepoin ... Q?e=ggyvZs


I also attached the TXT file below.

Hope this helps!
Attachments
Dwayne door - WCW.txt
(8.16 KiB) Downloaded 47 times

Rhyne
Posts: 1
Joined: Fri Dec 28, 2012 6:24 pm
Model of CNC Machine: Busellato jet3006/morbidelli author636

Re: Help: Post Processor Pratix S12 with ATC

Post by Rhyne »

Hi 574melvin.
I have the same machine
as you, and the same problem
did you ever get this problem corrected.
Thank you

Post Reply