Each one cuts in under 20 minutes. The natural wood one (poplar) cut in 5 minutes.
The finish on the white columns is Rustoleum Multi-color texture (rattle can). The wood underneath is redwood.
More Rotary Tests
- Rcnewcomb
- Vectric Archimage
- Posts: 5920
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
More Rotary Tests
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- mtylerfl
- Vectric Archimage
- Posts: 5895
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: More Rotary Tests
I’m enjoying seeing your rotary experiments, Randall! You’re paving the way!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Vectric Craftsman
- Posts: 289
- Joined: Mon Dec 01, 2014 3:53 pm
- Model of CNC Machine: Homemade
- Rcnewcomb
- Vectric Archimage
- Posts: 5920
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: More Rotary Tests
Today I was using 16" long 2x2 redwood pieces. I can now go from a square blank to a finished item in under 8 minutes.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- Rcnewcomb
- Vectric Archimage
- Posts: 5920
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: More Rotary Tests
A pair of small legs in redwood. Total machine time: 48 minutes.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- Rcnewcomb
- Vectric Archimage
- Posts: 5920
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: More Rotary Tests
All started with a 16" 2x2.
Criss-cross spirals (under 7 minutes), and 3D with some coves and flutes (under 20 minutes)
Criss-cross spirals (under 7 minutes), and 3D with some coves and flutes (under 20 minutes)
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- TReischl
- Vectric Wizard
- Posts: 4653
- Joined: Thu Jan 18, 2007 6:04 pm
- Model of CNC Machine: 8020 48X36X7 RP 2022 UCCNC Screenset
- Location: Leland NC
Re: More Rotary Tests
We will be expecting a full tutorial complete with videos and pdf file from you in the near future.
Nice work!
Nice work!
"If you see a good fight, get in it." Dr. Vernon Johns