Stage coach with horses

Discussions and examples relating to the Design & Carve series for Aspire

Moderator: Todd Bailey

Post Reply
tonydude919
Vectric Wizard
Posts: 762
Joined: Sat Jan 09, 2010 7:28 am
Model of CNC Machine: cnc mako shark ext bed with HD 5 gantry
Location: Buffalo,NY

Stage coach with horses

Post by tonydude919 »

I did this on a piece of cherry I had laying around. It's going to be a coat rack after I put the hooks on. I put a brown glaze on it after two coats of finish. The size is 8" x 22" Took 5 hrs to cut.

Tony
Attachments
stage coach with horses.jpg
What will matter is not what you bought but what you built; not what you got, but what you gave

rej
Vectric Wizard
Posts: 1245
Joined: Sun Jan 11, 2009 4:30 am
Model of CNC Machine: 2014 roc-tech 4x8 with servos
Location: bridgeton, indiana

Re: Stage coach with horses

Post by rej »

very nice.
http://www.3dsigncamp.com
http://www.roctechusacnc.com

User avatar
zeeway
Vectric Wizard
Posts: 3157
Joined: Thu Feb 11, 2010 9:24 pm
Model of CNC Machine: Self-built
Location: SC, USA

Re: Stage coach with horses

Post by zeeway »

Love it.

Angie

WoodEraser
Vectric Apprentice
Posts: 198
Joined: Wed Aug 08, 2012 6:30 pm
Model of CNC Machine: Shark Pro Plus
Location: Liberty Twp (N. Cincinnati) OH

Re: Stage coach with horses

Post by WoodEraser »

Tony, that looks great!
Eric
The WoodEraser

Liberty Twp (N. of Cincinnati & S. of Dayton) Ohio

User avatar
Phil
Vectric Wizard
Posts: 2403
Joined: Thu Nov 17, 2005 10:56 pm
Location: Pittsfield, MA

Re: Stage coach with horses

Post by Phil »

Nice work Tony

Post Reply