3D model required (paid)

Discussions and examples relating to the Design & Make projects for Aspire

Moderator: Todd Bailey

Post Reply
MRH91
Posts: 13
Joined: Tue Aug 22, 2017 12:39 pm
Model of CNC Machine: OPUS CNC

3D model required (paid)

Post by MRH91 »

Hello

Sorry if this post falls outside the rules of this forum, or if it's in the incorrect location. Please direct me to the correct place if so and I will post it there.

I've been approached to manufacture MDF panelling with a decorative pattern 3D carved into the surface (wave effects). I have VCarve Pro, therefore no knowledge of 3D modelling, so wondered if there was anyone on this forum who is competent and would like to quote me to get the model complete.

Please PM me if you're interested.

Many thanks

Rhys

User avatar
ohiolyons
Vectric Wizard
Posts: 1334
Joined: Wed May 27, 2009 7:16 pm
Model of CNC Machine: Laguna IQ
Location: Kettering, Ohio

Re: 3D model required (paid)

Post by ohiolyons »

The texturing toolpath and texture clipart abilities of VCarvePro don't satisfy your needs?

Pleasing textures are very subjective, what looks good to one my be horrible to another.

If you don't want to do it yourself, it maybe faster to for you or your client browse and buy what you want on on E-bay or Etsy.

It certainly will be cheaper, than a 100% custom creation to your clients desires.

At least look at those for ideas to give someone an idea what you want created.
John
CNC in Kettering, Ohio

User avatar
adze_cnc
Vectric Wizard
Posts: 3054
Joined: Sat Jul 27, 2013 10:08 pm
Model of CNC Machine: AXYZ 4008
Location: Vancouver, BC, Canada

Re: 3D model required (paid)

Post by adze_cnc »

You probably don't need to make a 3D model. Michael Mezalick has posted a few time on this subject. See here for one such post.

Post Reply