Vector Selection
Vector Selection
Your Training project for the "Open" sign. - I laid out a design with my own text inside an oval frame. I cant select vectors for the text by drawing a rectangle like you did. What am I doing wrong?
- SteveNelson46
- Vectric Wizard
- Posts: 2310
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
Re: Vector Selection
You probably just need to convert the text to vectors. Select the text and click on the "Convert To Vectors" icon on the drawing tab.
This really should not be in the Hardware forum. I'm not sure of the program you are using but maybe in the V-Carve or Aspire Section?
This really should not be in the Hardware forum. I'm not sure of the program you are using but maybe in the V-Carve or Aspire Section?
Steve
- Rcnewcomb
- Vectric Archimage
- Posts: 5927
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Vector Selection
Be aware that dragging left-to-right behaves differently than dragging right-to-left.
When dragging left-to right only items that are fully within the rectangle will be selected.
When dragging right-to-left any vector inside or crossed by the rectangle will be selected.
Vectors on a Locked layer will NOT be selected.
When dragging left-to right only items that are fully within the rectangle will be selected.
When dragging right-to-left any vector inside or crossed by the rectangle will be selected.
Vectors on a Locked layer will NOT be selected.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop