Hi can anyone recommend where i can purchase a computer with a parallel port. Ebay amazon or anyone that ship outside the USA
best computer brand and model type so i can search from my side.
thanks .
computer parallel port
- Rcnewcomb
- Vectric Archimage
- Posts: 5928
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: computer parallel port
What country?
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
Re: computer parallel port
Barbados
- SteveNelson46
- Vectric Wizard
- Posts: 2310
- Joined: Wed Jan 04, 2012 2:43 pm
- Model of CNC Machine: Camaster Stinger 1
- Location: Tucson, Az.
Re: computer parallel port
Most PCs will accept an internal parallel data card with a port to the back of the computer. Pretty old school. They aren't used much any more. You might want to look into a USB to parallel adapter. Here is a link to one on Amazon.
https://www.amazon.com/C2G-16899-Parall ... 7302&psc=1
If you are ordering a PC on line you can specify an add-on parallel card from the manufacturer. Most of them will do it. If you can buy a PC locally the store will most likely install it for you.
https://www.amazon.com/C2G-16899-Parall ... 7302&psc=1
If you are ordering a PC on line you can specify an add-on parallel card from the manufacturer. Most of them will do it. If you can buy a PC locally the store will most likely install it for you.
Steve
- Rcnewcomb
- Vectric Archimage
- Posts: 5928
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: computer parallel port
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop