Corel Draw

Post Reply
captmike
Posts: 6
Joined: Mon Aug 06, 2018 12:54 am
Model of CNC Machine: shapeoko 3 xxl

Corel Draw

Post by captmike »

What are the advantages of Corel Draw? I want to import JPEG pictures from the web. I use VCarve Pro 9.5 and I found that when I turn the photo to vectors, the vector lines are broken and the image is incomplete. Will Corel Draw fix this? Thanks Mike

nicksilva
Vectric Craftsman
Posts: 282
Joined: Thu Aug 21, 2014 8:13 pm
Model of CNC Machine: ULS M300, Rockler 60th Ann. Shark
Location: Dallas, TX USA
Contact:

Re: Corel Draw

Post by nicksilva »

I've used corel draw for years. in combination with the corel paint (part of the same suite), I've
successfully converted over 8000 images in my time, with better accuracy than I get from Aspire.
cheers!
"Out of my mind. Back in 5 Minutes."

User avatar
dhellew2
Vectric Wizard
Posts: 1204
Joined: Thu May 22, 2008 10:14 pm
Model of CNC Machine: Legacy Artisan 72
Location: Royal City Washington

Re: Corel Draw

Post by dhellew2 »

Corel draw is a graphics probram therefore designed to do graphics so it does have more tracing tools. Each has their own purposes. I too often use Corel to trace before importing into Aspire.
What Aspire does well, Corel does not.
Dale
You will get old if you live long enough!

Dale

User avatar
Adrian
Vectric Archimage
Posts: 10121
Joined: Thu Nov 23, 2006 2:19 pm
Model of CNC Machine: ShopBot PRS Alpha 96x48
Location: Surrey, UK

Re: Corel Draw

Post by Adrian »

There are lots of different tracing tools out there. I've beta tested some which are the same price as VCarve and all they do is automatically trace images.

One thing to bear in mind is that tracing in a lot of graphics packages is aimed at producing a trace that is visually correct not one that is meant for another program to read and produce toolpaths from. With many images of the type that would be used for CNC work that is not an issue but with complex colour photographs it can be.

Post Reply