Mach 3- Programming a zero routine
-
- Posts: 3
- Joined: Wed Jun 27, 2012 5:18 pm
- Model of CNC Machine: Vortech Router/ Mach 3
Mach 3- Programming a zero routine
I have an idea of creating a gcode file that will automatically re reference the zero of my machine (using home switches) at the end of my loaded .tap file. This would act as a precaution so that someone with little or no cnc knowledge can run the machine with minimal risk. Does anybody know how i could program this, or if its even possible? Thanks!
- Adrian
- Vectric Archimage
- Posts: 14544
- Joined: Thu Nov 23, 2006 2:19 pm
- Model of CNC Machine: ShopBot PRS Alpha 96x48
- Location: Surrey, UK
Re: Mach 3- Programming a zero routine
Definitely. I used to have exactly that routine on my old Mach3 machine.
Best place to look is http://www.machsupport.com/forum/index.php
Best place to look is http://www.machsupport.com/forum/index.php
-
- Vectric Apprentice
- Posts: 84
- Joined: Fri Nov 04, 2005 5:19 am
- Location: Wichita/Derby KS
- Contact:
Re: Mach 3- Programming a zero routine
Not sure why you would want to keep re-referencing your machine each time since it only needs to be done when first powering up but anyway just put a g28.1 in your file to reference all home
Gary
Gary
Beckwith Decor Products
Custom CNC Tooling/Onsrud Distributor
http://www.beckwithdecor.com
Custom CNC Tooling/Onsrud Distributor
http://www.beckwithdecor.com