K2 CNC

Post Reply
User avatar
Phil
Vectric Wizard
Posts: 3022
Joined: Thu Nov 17, 2005 10:56 pm
Location: Pittsfield, MA

K2 CNC

Post by Phil »

A friend recently picked up a K2 CNC machine, circa 2005. It looks like a 12" x 24" cutting area. It came with no manual, no software and no router. Good news is he got it for free. If anyone can help find a manual and machine software it would be helpful.
Also if anyone owns one and can provide any helpful information, that would be appreciated.

Phil

User avatar
Rcnewcomb
Vectric Archimage
Posts: 5864
Joined: Fri Nov 04, 2005 5:54 am
Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
Location: San Jose, California, USA
Contact:

Re: K2 CNC

Post by Rcnewcomb »

A Centroid upgrade might be a good solution. You can request a quote.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop

jonathanmahnken
Vectric Apprentice
Posts: 58
Joined: Wed Apr 07, 2021 5:58 pm
Model of CNC Machine: warthog uccnc

Re: K2 CNC

Post by jonathanmahnken »

I just did this with a 4x8 warthog. all the old electronics were fried but the mechanics were perfect. I bought a new pc with windows 10. I am running UCCNC(im told this is the more modern Mach 3) as the control software, and vcarve pro for cam. so far I have no issues other than that im brand new to cnc...

Post Reply