I wonder if anyone can help. I'm using a Chinese spindle motor on my Router it's rated at 8amps 400Hz 220V 2pole 24,000RPM,
I'm using the Mitsubishi FR-D720 inverter and I seem to have screwed up the parameter settings.
I need settings 1 to 10 and any others that may be important.
Thanks in advance
George
Mitsubishi FR-D720 help please
- Len-Tikular
- Vectric Wizard
- Posts: 415
- Joined: Sat Feb 13, 2010 11:27 am
- Model of CNC Machine: Home made revision 3
- Location: Denholm Scotland.
Mitsubishi FR-D720 help please
Len-Tikular (A glider pilots dream cloud)
Aspire 10.5
Mach4 Hobby
Ess Smoothstepper + C11g+C10s
Aspire 10.5
Mach4 Hobby
Ess Smoothstepper + C11g+C10s
- Rcnewcomb
- Vectric Archimage
- Posts: 5887
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: Mitsubishi FR-D720 help please
You may wish to ask this on the CNCZONE forum.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- Len-Tikular
- Vectric Wizard
- Posts: 415
- Joined: Sat Feb 13, 2010 11:27 am
- Model of CNC Machine: Home made revision 3
- Location: Denholm Scotland.
Re: Mitsubishi FR-D720 help please
Thanks, I did. But the world is full of knowledge. It has no boundaries.
Regards
George
Regards
George
Len-Tikular (A glider pilots dream cloud)
Aspire 10.5
Mach4 Hobby
Ess Smoothstepper + C11g+C10s
Aspire 10.5
Mach4 Hobby
Ess Smoothstepper + C11g+C10s