2003 Shopbot value

Post Reply
michael307
Vectric Apprentice
Posts: 50
Joined: Wed May 24, 2006 2:06 pm
Location: Wisconsin,USA

2003 Shopbot value

Post by michael307 »

I know it is tough to price an unseen setup but roughly what would be a good price for a 2003 4x4 with digital probe, diamond blade,vinyl cutter all working fine with all the controls with it. I asked this question on the Shopbot forum and got no response so I wanted to try you guys and see if someone can give me some guidance. If someone could even say yes it is worth $5K at least.

Mike
PhotoVCarve
VCarvePro v8
VectorArt3d
Servo Driven 12X24 router
Plasmacam 4x4

User avatar
scottp55
Vectric Wizard
Posts: 3432
Joined: Thu May 09, 2013 11:30 am
Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP10
Location: Kennebunkport, Maine, US

Re: 2003 Shopbot value

Post by scottp55 »

Mike,
It's probably best to post it on the Shopbot Forum;
http://www.talkshopbot.com/forum/forumd ... items-only
And post as many pictures as you can...including the control box and a close up of the steppers as well.
Should give you a ballpark range.
scott
"One accurate measurement is worth a thousand expert opinions"

GMH


scott

ger21
Vectric Wizard
Posts: 1526
Joined: Sun Sep 16, 2007 2:59 pm
Model of CNC Machine: Custom DIY
Location: Shelby Township, MI, USA
Contact:

Re: 2003 Shopbot value

Post by ger21 »

michael307 wrote:. If someone could even say yes it is worth $5K at least.
Does it have a spindle, or a router? If no spindle, I don't think it's worth more than $3K to $4K.
But the reality is that it's worth whatever someone is willing to pay.
Gerry - http://www.thecncwoodworker.com

michael307
Vectric Apprentice
Posts: 50
Joined: Wed May 24, 2006 2:06 pm
Location: Wisconsin,USA

Re: 2003 Shopbot value

Post by michael307 »

These are some of the pictures

Mike
Attachments
38.jpg
37.jpg
40.jpg
41.jpg
42.jpg
43.jpg
PhotoVCarve
VCarvePro v8
VectorArt3d
Servo Driven 12X24 router
Plasmacam 4x4

Post Reply