laser connector problem

Post Reply
deltagroove
Posts: 6
Joined: Mon Oct 24, 2016 4:25 pm
Model of CNC Machine: shark hd4

laser connector problem

Post by deltagroove »

the shelf under my cnc not real well thought out a I caught the wires pulled it out as it dangled the wires for the laser pulled out of their pins. I can easily repair it but need to know what sockets each of the 4 wires from the laser go in?? help !!

deltagroove
Posts: 6
Joined: Mon Oct 24, 2016 4:25 pm
Model of CNC Machine: shark hd4

Re: laser connector problem

Post by deltagroove »

nobody has the laser and can look at the connector ?? bumming

User avatar
FixitMike
Vectric Wizard
Posts: 1583
Joined: Sun Apr 17, 2011 5:21 am
Model of CNC Machine: Shark Pro Plus (extensively modified)
Location: Renton, WA USA

Re: laser connector problem

Post by FixitMike »

There are at least 25 different brands of CNCs, each of which has different models. Posting your brand and model would help. Also a photo of the area in question.

This forum is primarily for discussing the use of Vectric software. Hardware questions are best answered by the manufacturers and on their forums.
Good judgement comes from experience.
Experience comes from bad judgement.

deltagroove
Posts: 6
Joined: Mon Oct 24, 2016 4:25 pm
Model of CNC Machine: shark hd4

Re: laser connector problem

Post by deltagroove »

The machince I have is a shark HD4 , the laser I got from rockler but I believe it is also a next wave automation product same as the shark. Thanks!!

cnc4me
Vectric Apprentice
Posts: 62
Joined: Wed Dec 29, 2010 8:03 pm
Model of CNC Machine: XYZ Gantry, PMDX motion, Mach3
Location: Sylvania, Ohio, USA

Re: laser connector problem

Post by cnc4me »

contact nextwave automation I am sure they will be able to help. www.nextwaveautomation.com
Hope this helps

Post Reply