Can someone please help me with the input of this bit as I have tried several times and keep coming up with an error. I have looked at the specs and I am completely lost. I am using VCarve Desktop 8.
Thank you.
45761 Solid Carbide 60 Degree Engraving Bit
- FixitMike
- Vectric Wizard
- Posts: 2173
- Joined: Sun Apr 17, 2011 5:21 am
- Model of CNC Machine: Shark Pro Plus (retired)
- Location: Burien, WA USA
Re: 45761 Solid Carbide 60 Degree Engraving Bit
Post a picture of the tool entry window with your entries and it will be easier for someone to see what you are doing. You can use the Windows Sniping Tool to do this, and then upload the resulting .jpg.
Good judgement comes from experience.
Experience comes from bad judgement.
Experience comes from bad judgement.
- scottp55
- Vectric Wizard
- Posts: 4713
- Joined: Thu May 09, 2013 11:30 am
- Model of CNC Machine: ShopbotDesktop 5.5"Z/spindle/VCP11.5
- Location: Kennebunkport, Maine, US
Re: 45761 Solid Carbide 60 Degree Engraving Bit
Should look like this except change the flat size to .01".....ignore the feeds and speed/pass depth, as that's for tiny 3D's in hard Maple.
scott
scott
I've learned my lesson well. You can't please everyone,so you have to please yourself
R.N.
R.N.
Re: 45761 Solid Carbide 60 Degree Engraving Bit
Thanks Scott. This is exactly what I was looking for. I could not find on the website for these dimensions. Nor did they come with any.